Adding Apple Pay to Existing Donation Forms

@Cheryl Cieslinski
A little tough to say without knowing exactly how your current forms are set up.

The general theory is that each applepay form needs to have a corresponding PageBuilder page that includes the [[S1300:_____]] tag (where the underscore gets replaced with the df_id of the form you are using). Then you'd insert that link into the corresponding form. The simple-but-time-consuming solution is to make a dedicated page for every moblepay form and then manually edit every Donation2 form to add an HTML caption with the link to it.

A bit more complicated code to save yourself a ton of time, use Luminate's S334 tag to grab content from the URL and spit it out…

• Create a single PageBuilder page called mobile_pay
• Insert the tag [[E1300:[[S334:df_id]]]] in there wherever you want your form to appear.
• In the blueprint for your donation form, insert a link with the href="SPageNavigator/mobile_pay?df_id=[[S334:df_id]]"

Note that the tag inside of the advanced solution's pagebuilder page starts with an “E” instead of an “S”…that tells Luminate to do the 334 before doing the 1300.